• Glass cutting machine repair and maintenance


    With the continuous development of science and technology, glass cutting technology and equipment has a great potential and broad market prospect. Therefore is a very popular device, the following is said to you about glass cutting machine maintenance points:

    A, machine work before must ensure that the laser tube is full of circulating water

    Open automatic glass cutting machine into the water tank, water tank, pump and clear the dirt on the water pump. Good clean water tank clean, replace the circulating water, the water pump to restore back into the water tank, the connection pipe inserted into the inlet of the pump, tidy up the joint. The pump power alone, and run 2 to 3 minutes (the laser tube is full of circulating water).

    Second, the fan clean

    Fan for a long time use, can make the fan inside the accumulation of a lot of solid dust, let the fan make a big noise, in addition to flavor and is unfavorable to the exhaust. When appear insufficient suction fan smoke not free, turn off the power supply first, will be discharged into the duct and the duct on the fan, remove the inside of the dust, and then put the fan on, and pull out the inside of the blades, until clean, then put the fan installed.

    Three, lens cleaning (advice before work every day, clean equipment must be in a state of shutdown)

    Laser cutting machine lens edge central to rotary clean glass. No. 3, lens and focus lens from the frame, in the same way to wipe, wipe after the completion of the same back then.

    Note: 1. The lens should be wiped gently, do not damage the surface coating (metal, wood coating lens more durable);

    2. The cleaning process to should take put down gently, prevent fall;

    3. The focus lens installation please be sure to keep the concave downward.

    The cleanness of four, guide rail (suggest clean once every half a month, shutdown operation)

    Guide rail, straight axis, as one of the core parts of the equipment, it is the function of guidance and supporting role. In order to ensure the machine has high machining accuracy, to guide, linear has higher guidance precision and good processing quality of the glass cutting machine, guide rail, straight axis carefully conduct routine maintenance.